YH1600 Haze Meter-3NH

YH1600 Haze Meter

Benchtop Color Haze Meter YH1600

YH1600 Haze Meter can easily realize ASTM D1003 non-compensation method, ISO 13468 compensation method, full transmittance and fog test.

Key Highlights

Double standard ISO & ASTM
CIE LAB, XYZ, Yxy, LCh, s-RGB, βxy color space
Large-size touch control screen
ASTM D1003 uncompensated method, ISO 13468 compensated method, full transmittance, haze test
Independent light source detector and temperature sensor
Measuring and analyzing fog, color and light transmittance software
Color management software

YH1600 Haze Meter Instructions Operating Manual YH1600 Haze Meter PDF

This YH1600 Haze Meter Instrument are Certified with

1 Years Warranty (Additional support period of 3 years)

YH1600 Haze Meter can easily realize ASTM D1003 non-compensation method, ISO 13468 compensation method, full transmittance and fog test. Through precise concave grating and 256-pixel CMOS detector, the transmittance curve of transmitted sample can be accurately collected, various chroma data of transmitted sample can be accurately output, and high-precision and repeatable transmittance, fog and chroma data measurement can be realized.

Advantages of YH1600 Haze Meter

1.Double standard ISO & ASTM

Can meet the test standard requirements of different users; meet the standards: ASTM D1003/1044, ISO 13468, ISO 14782, GB/T 2410, JJF 1303-2011, CIE 15.2, JIS K7105, JIS K7361, JIS K 7136

2.Multiple observation light sources

The YH1600 colorimeter provides CIE LAB, XYZ, Yxy, LCh, s-RGB, βxy color space, as well as D65, A, C, D50, D55, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11 and F12 observation light sources, which can meet the special measurement needs under different measurement conditions.

3.Easy operation and faster and more accurate measurement

The YH1600 Haze Meter is equipped with a large-size touch control screen, which is easy and convenient to operate. The 256 pixel dual array CMOS image sensor can realize high accuracy and repeatable transmittance and haze measurement. USB data output unit that interfaces with the laboratory system.

4. Compensation port to make the measurement data more accurate

Meet ASTM D1003 uncompensated method, ISO 13468 compensated method, full transmittance, haze test, provide more accurate test results

5.Dynamic measurement

Independent light source detector and temperature sensor to monitor the light source and environmental changes at all times to ensure reliable test data

6.Convenient measurement and wide sample adaptation

Open measurement area for vertical and horizontal testing to accommodate more samples under test

7.Quality management software

It provides powerful software for measuring and analyzing fog, color and light transmittance, which is suitable for quality monitoring and tabulating management of fog, light transmittance and color data in various industries. Data the management of users on the PC computer, compare the fog, transmittance and color differences, generate test report forms, facilitate customer customization and management.

Application of YH1600 Haze Meter

YH1600 Haze Meter is widely used in glass processing, plastic processing, film, display screen processing, packaging industry, liquid analysis and other aspects.

Product model	YH1600 Haze Meter
Illumination mode	Transmittance: 0/D (parallel illumination, diffuse receiving) in accordance with standards: ASTM D1003/1044, ISO 13468, ISO 14782, GB/T 2410, JJF 1303-2011, CIE 15.2, JIS K7105, JIS K7361, JIS K 7136
Characteristic	The instrument can easily realize ASTM D1003 uncompensated method, ISO 13468 compensation method, full transmittance, fog test. The instrument can accurately collect the transmittance curve of the transmitted sample, and can accurately output various chroma data of the transmitted sample. High hardware configuration, open measurement area, vertical, horizontal testing. It is widely used in glass processing, plastic processing, film, display screen processing, packaging industry, liquid analysis and other aspects.
Integrating sphere size	Φ 154 mm
Illumination source	400 ~ 700 nm combined LED light source (wavelength scalable customized)
Light splitting mode	Concave grating
Inductor	256 pixel dual array CMOS image sensor
Measuring wavelength range	400 ~ 700 nm (wavelength scalable customization)
Wavelength interval	10 nm
Half bandwidth	10 nm
Determination range of transmittance	0-100%
Measuring aperture	Φ20 mm/Φ15 mm/Φ8 mm/Φ4 mm (select single aperture)
Sample size	Thickness less than 170 mm
Color space	CIE LAB, XYZ, Yxy, LCh, s-RGB, βxy
Chromatic formula	ΔEab, ΔE94, ΔEcmc (2:1), ΔEcmc (1:1), ΔE00
Other chromaticity indicators	Haze (ASTM D1003/1044, ISO 13468), Transmittance T (ISO), Transmittance T (ASTM) WI (ASTM E313, CIE/ISO, AATCC, Hunter), YI (ASTM D1925, ASTM 313), Absorbance, Cobalt Platinum Index, Gardner Index
Observer angle	2 °/10 °
Observation light source	D65, A, C, D50, D55, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12
Display	Spectrogram, sample chroma value, color difference/graph, color graph, color simulation, pass/fail result
Measurement time	About 1.5s
Resolution of fog	0.01 unit
Repeatability of nebulization	Φ20 mm aperture, less than 0.08 (after instrument preheating and correction, test the standard nebulizer with the nebulization of about 40 at an interval of 5s for 30 times of standard deviation)
Inter-stage difference	Φ20 mm aperture, less than 0.4 (after instrument preheating and correction, test the standard deviation between the standard nebulizer of nebulization and the reference value at an interval of 5s)
Dimensions	Length X Width X Height = 290X211X511 mm
Weight	Approx. 7.6 kg
Power supply mode	24 V DC, supplied by 3A power adapter
Illumination light source lifetime	> 3 million measurements in 5 years
Display screen	TFT True Color 7 inch, Capacitive Touchscreen
Interface	USB, Print Serial , Bluetooth
Stored Data	5,000 samples, 20,000 samples
Language	Simplified Chinese, Traditional Chinese, English
Operating Temperature Range	0 to 40 ° C (32 to 104 ° F)
Storage Temperature Range	- 20 – 50 ° C (-4 – 122 ° F)
Standard Annex	Power adapter, instruction for use, quality management software (download), data cable, 0% calibration box, measuring caliber
Optional Accessories	Microprinter, Test Fixture, Standard Fog Disk, Footswitch
Notes:	Subject to change without notice

Our Valued Clients

FAQs About Haze Meters

To determine haze, haze meters are used in multiple industries such as plastic, glass, film, coating, and displays. This ensures that all optical quality of the product is in the appropriate specification, including aesthetic compliance and meeting the intercontinental quality standards.

Look for dirty or fingerprinted glass along the optical path, recalibrate with standards, and check the set-up for outside light so that it is controlled. If the problems still exist, please reach out to the helpdesk or book a service with your professional service.

A haze meter measures the light. It quantifies the measure of transmitted light across a material and the degree of scattered and diffused light.

To operate the haze meter, first calibrate the instrument, clean the sample, position it correctly in the holder, and initiate the measurement. The instrument then shows the haze and overall transmittance readings.

The haze meter test assesses the degree of light scattering that occurs when light traverses a transparent or translucent material, producing a percentage that quantifies example or cloudiness.

YH1600 Haze Meter

Our Valued Clients

Related Haze Meters You May Also Like

Give us a call!

Need pricing?

Already know what you need?

YH1600 Haze Meter

Our Valued Clients

1. What Are The Main Uses Of A Haze Meter?

2. What Are The Ways To Resolve Haze Meter Malfunctioning?

3. What is the principle of a haze meter?

4. How to operate a Haze Meter?

5. What is the haze meter test?

Related Haze Meters You May Also Like

Give us a call!

Need pricing?

Already know what you need?