3nh is a professional manufacturer of spectrophotometers. The new Bench top spectrophotometers is on the market. It can measure sample reflection and transmission spectrum for color matching and precise color transfer.
The 3nh D/8 spectrophotometer features a diffuse illumination/8° reception optical structure, dual optical path system, and combined full-spectrum LED + UV light source. It supports 18 light sources, 9 color spaces, and 9 chromaticity indices, with repeatability ΔEab < 0.03 and inter-instrument difference ΔEab < 0.15. Capable of simultaneous SCI/SCE mode measurement and fluorescent sample analysis, it uses dual positioning via screen camera viewfinder and stable plate, paired with advanced color management software for high-precision color analysis.
A powerful and portable instrument for color measurement, management, transmission, and report printing.
High - end Hardware Configuration: Equipped with a 3.5 - inch TFT touch - color screen, a 1000 - line blazed grating, and a silicon photocell array detector with a relatively large photosensitive area, etc.
Stable Measurement: Adopts a long - lifespan, low - power consumption full - spectrum combined LED light source, which can include or exclude UV.
Color Transfer: Measures the sample's reflected spectrum, providing accurate Lab data, which can be used for color matching and color transfer.
Precise Measurement: Features a dual - optical - path system with an optical resolution of less than 10nm in the visible light range. It can simultaneously measure the SCI and SCE spectra of samples.
Suitable for color analysis and transfer of various solid, liquid, and fluorescent samples, as well as in scientific research experiments.
Solid - state sample
Liquid - state sample
Powder sample
Fluorescent sample
Threenh YS6060 has many features, like 7 inches TFT capacitive touch screen display, full illuminants, reflective d/8 and transmissive d/0 geometry(including or excluding UV). With very stable and precise color measurement, large storage and powerful PC software all make YS6060 ideal for color analysis within R&D and laboratory environments.
The portable desktop spectrophotometer TS8260 is a spectrophotometer developed by 3nh using its own core technology of spectroscopy. It uses a built-in silicon photodiode array (40 pairs of dual-column) sensors and an imported whiteboard, while taking into account the speed of measurement and the convenience of operation.
The unique and innovative design of YL4560 can not only provide non-contact measurement solutions directly from the production line,lt can also ensure stable and high-precision measurement results.
Developed by 3nh using independent spectrophotometer core technology, The use of dual array CMOS image sensors has high sensitivity and a wide spectral response range,More accurate testing, equipped with a 10.5 inch independent rotatable tablet computer, easy and fast operation.
FAQs About Spectrophotometer
a. Users must specify Standard File Name, Sample File Name and Sample Database File Name when first use.
b.Standard File is use to store standard measurement data. Sample File is used to store sample measurement data. Sample Database File is used to store the measured data exported from sample records.
a. It’s needed to perform manual calibration for NH300 when first starting.
b. In the subsequent starting, no need to perform manual calibration.
c. Suggestion: it’s best to perform manual calibration once a week or when NH300 measured data is not accurate.
There are three measuring apertures for NH310: Φ8mm (standard accessory), Φ4mm (standard accessory), extended Φ8mm (optional accessory)
a. Turning on
b. Removing measuring aperture, install the needed measuring aperture.
c. Select "Settings-Aperture Setting" in main menu to select corresponding measuring aperture.
d. After selecting aperture, the instrument will display "White and Black Calibration" interface. White and black calibration must be performed.
e. Replace completed.
a. If this phenomenon occurred, it means the battery power is not enough. You need to charge the battery.
b. When charge the battery, please insert the battery to the instrument, and plug in the adapter to charge the battery. After 5 minutes, the instrument can be turned on.
c. If the instrument still cannot be turned on after charging 5 minutes, you can pull out the adapter and re-plug in to check it. Or repeat this operation.
d. If the instrument still cannot be turned on after charging 5 minutes, you can turn off the colorimeter and turn on it again to check it. Or repeat this operation.
e. If you have tried all the methods above but the colorimeter still cannot be turned on, please change the battery.
a. Connect colorimeter to the PC with USB cable.
b. Turn on the colorimeter to enter main menu. Select "Comm" and press "Enter" key to start communication.
c. Right click on "My Computer" on the desktop. Click "Manage" -> "Device Manager" -> "Ports", you can see similar display as "SCI USB2Serial (COM6)".
d. Click "Settings->Communication Parameters" in CQCS3 software interface. Select the corresponding port in "Serial Port".