For those working in appearance quality inspection for plastics, coatings, automotive interiors, home appliances and printing, you have probably encountered this confusing situation: two test samples show minimal color difference data and look quite similar in hue, yet a clear visual gap appears when placed side by side. Many people assume the color measurement is inaccurate, but the root cause often lies in another overlooked indicator — gloss.
Color defines what shade an object is, while gloss describes how light reflects off its surface. For products with strict appearance requirements, controlling only color difference without monitoring gloss is insufficient to evaluate overall surface consistency. In this article, we break down gloss measurement in detail and help you select among our three new gloss meter models.
Take black plastic components as a typical example. Two batches may have nearly identical Lab colorimetric values, but differences in surface texture, spraying process, material formulation and molding conditions can result in one being high-gloss and the other matte. Once assembled into the same finished product, the visual inconsistency becomes obvious. Automotive interiors, home appliance housings, coatings, plastics and packaging materials are where such issues frequently occur.
Therefore, quality control needs to check not only whether the color drifts, but also whether the surface gloss stays consistent. Only when color and gloss are integrated into one evaluation system can appearance control be complete.
Let’s start with the fundamental principle. Gloss, or the perception of shininess, originates from two ways light interacts with a material surface: smooth surfaces produce specular reflection with concentrated light for a bright, mirror-like look; matte or textured surfaces scatter light via diffuse reflection for a soft, low-shine finish. A gloss meter emits light at a fixed angle, captures the specular reflected light from the corresponding direction, and converts the signal into gloss values in GU (Gloss Units).
High-gloss, medium-gloss and matte surfaces reflect light with vastly different intensities, so a single angle cannot cover all sample types. The national standard GB/T 9754—2025 and international standard ISO 2813 specify three standard geometries: 20°, 60° and 85°, each for a distinct gloss range:
20°: The magnifier for high-gloss surfacesLight strikes nearly vertically, creating a tightly focused specular beam that is highly sensitive to minor gloss variations on high-gloss materials. If a 60° reading exceeds 70 GU, switch to the 20° angle. It is ideal for automotive clear coats, piano finishes, electroplated parts and mirror-effect plastics.
60°: Universal benchmark for most industriesThis balanced middle angle suits the medium-gloss range of 10–70 GU and covers over 80% of routine testing scenarios. It is the default choice when no test standard is specified. Common applications include wood coatings, home appliance casings, ceramic glazes, standard plastics, flooring panels and printed paper, widely used for incoming inspection and finished-product retention sampling.
85°: The magnifier for low-gloss matte surfacesThis grazing angle runs nearly parallel to the sample surface, amplifying weak reflected signals from low-gloss materials. It is designed for matte and textured substrates where the 60° reading is below 10 GU, such as matte plastics, suede-like leather, flat wall paints and coarse paperboards.

A single golden sample can deliver readings at 20°, 60° and 85° in one test, easily distinguishing high-gloss and matte performances.
Picking the wrong angle leads to unreliable results: testing high-gloss samples at 85° produces falsely low readings and may wrongly reject qualified bright coatings; testing matte samples at 20° captures little specular light, causing low and unstable readings. If all samples are measured only at 60°, the sensor can saturate on glossy surfaces while subtle differences on matte surfaces get masked.
Follow this practical workflow: start with 60° for a preliminary test. Retest at 20° if the result >70 GU, or at 85° if the result <10 GU. Always use the same measurement angle for batch comparison.
To meet the above three typical testing requirements, 3nh launches three cost-effective new gloss meters for affordable gloss control on production lines.
① KS60SA: Economy 60° single-angle gloss meterBuilt for daily on-site industrial QC with the universal 60° geometry. It features a 9×15 mm measuring spot, 0–220 GU range and measurement speed under 1 second. Its metrological performance complies with JJG 696 for working gloss meters. The device stores up to 10,000 records, weighs roughly 300 g, and runs more than 10,000 measurements on one AA battery.
Suitable for regular 60° gloss checks, fast on-site data acquisition for incoming material inspection, in-process sampling and finished goods release. Widely adopted for paints, inks, coatings, printed paper, plastic electronics, furniture, ceramics, electroplating, hardware and marble. It delivers stable, traceable readings and solves the pain points of inconsistent and incomparable gloss data.

KS60SA Highlights: Universal 60° angle, instant testing directly on production lines
② KS268A: Economy three-angle gloss meterAn all-in-one unit supporting 20°/60°/85°. It handles both high-gloss and matte samples with one instrument, finishing each angle measurement in just 0.5 seconds and meeting JJG 696. It eliminates the need to purchase, calibrate and maintain multiple single-angle meters to cut costs. It is widely used for routine gloss inspection of paints, inks, coatings, printed paper, plastic electronics, furniture, ceramics, electroplating, hardware and marble. Optional printer and Bluetooth 5.0 are available.

KS268A Highlights: Integrated 20°/60°/85°, Bluetooth 5.0, compatible with external printers
③ KS60MA: Entry-level 60° micro-spot gloss meterIt is engineered with a tiny measuring spot for small, narrow and irregular workpieces. The 2×4 mm spot reaches hard-to-test areas including small hardware edges, buttons and the perimeter of holes. It is a budget-friendly option for contract manufacturers and IQC inspectors who need to test miniature parts. It works for paints, inks, coatings, printed paper, plastic electronics, furniture, ceramics, electroplating and marble.

KS60MA Highlights: 2×4 mm micro spot, perfect for small parts, particles and areas around holes
KS60SA
Measurement angle: 60°; Spot size: 9×15 mm; Range: 0–220 GU, resolution 1 GU; Measurement time: <1 s; Complies with JJG 696; 10,000 data storage; USB for power supply only; For routine on-site sampling of flat surfaces.
KS268A
Measurement angle: 20°/60°/85°; Spot size: 20°:9×10 mm, 60°:9×15 mm, 85°:5×38 mm; Range: 0–220 GU (20°/60°), 0–160 GU (85°), resolution 1 GU; Measurement time: 0.5 s per angle; Complies with JJG 696; 10,000 data storage; USB connection, compatible with GQC6 software; Ideal for mixed high-gloss & matte product portfolios to avoid multiple instruments.
KS60MA
Measurement angle: 60°; Spot size: 2×4 mm micro spot; Range: 0–220 GU, resolution 1 GU; Measurement time: <1 s; Entry-level economical model; 10,000 data storage; USB connection, compatible with GQC6 software; Dedicated to small, narrow and profiled parts.
Mainly 60° routine gloss testing, limited budget, fast on-site readings → KS60SA
Wide product range covering both high-gloss and matte, avoid multiple devices → KS268A
Focus on small hardware, narrow edges, hole surroundings and irregular tiny samples → KS60MA
Appearance quality control is shifting from subjective visual judgement to objective data-driven management. Color tells us “what the color is”, while gloss defines “how the surface reflects light”. By controlling both indicators simultaneously, you can greatly reduce the awkward scenario where color difference data looks acceptable yet samples show obvious visual mismatch side by side.
Release Date: [2026-09-11]Dubai, UAE — 3nh, a global specialist in color measurement, color formulation and surface gloss testing instruments, is plea....
Milan, Italy | June 9-12, 2026 | Hall 11, Booth D31As a leading company of Color Measurement and Surface Analysis equipment, 3nh Global is exhibiting ....
As the snowflakes dance gently and the streets are adorned with twinkling lights, Christmas brings a season of warmth, joy, and vibrant colors. From t....
CHINACOAT 2025 Grand Opening! At booth B44 in Zone 5 of Hall E3 at the Shanghai New International Expo Centre, 3nh immediately became the focus of att....
Color Process Control: Master the Basics for Reliable Color QualityThe competitive marketplace today demands that color be not just an appearance matt....
On September 10th, the highly anticipated 26th China International Optoelectronic Expo (CIOE) grandly opened at the Shenzhen World Exhibition & Conv....
In the current society, where color consistency makes or breaks a product’s market success, analysis and explanation of measurements made by experts i....
3nh is happy to announce that we will be exhibiting at the Vietnam International Plastics & Rubber Industry Exhibition 2025 scheduled from 17 to 20 September 2025 at Saigon Exhibition & Conference Center, Ho Chi Minh City, Vietnam.
Threenh Technology is thrilled to share that we will be attending the Asia-Pacific Coatings Show (APCS) 2025, the premier exhibition for the coatings industry in the Asia-Pacific region.
Discuss your project with one of our product specialists:
0086 755 26508999We respond to quote requests within 1 business day.
service@3nh.comSubmit a demo request for the product you're interested in.
Get a Demo